Whole-Home Backup Power with Anker SOLIX E10
Keep your home powered through outages with a smart, scalable battery backup system installed by Eleos Electric — Sonoma County's licensed battery storage experts.
10kW
Turbo output / unit
7.6kW
Continuous output
20ms
Automatic switchover
12×
Prioritized circuits
When The Grid Goes Down
Your home shouldn't.
PSPS shutoffs, winter storms, and aging grid infrastructure all hit Sonoma County. The same outage that knocks out a neighbor's lights can cost you a refrigerator full of food, a sleepless night, or a missed CPAP cycle.
Refrigerator & freezer
Hundreds of dollars of groceries spoil in a 24-hour outage.
Wi-Fi & remote work
Modems, routers, and home offices die the moment grid power drops.
CPAP & medical devices
Medical equipment can't ride out an unexpected multi-hour outage.
Heating & cooling
Cold winter nights and 100°F summer days become survival problems.
Security systems
Cameras, alarms, and door sensors go dark exactly when you need them.
Garage doors
No power means no easy way in or out — bad in an evacuation.
Essential lighting
Stairs, hallways, and bathrooms become hazards in a dark house.
PSPS uncertainty
PG&E shutoffs can last hours or days with little warning.
Meet The Battery
The Anker SOLIX E10 Smart Hybrid Whole-Home Backup System
A modular battery platform built for everyday energy savings and grid-down resilience. The E10 stores energy from solar or grid, watches the weather, and seamlessly takes over the moment the lights flicker.
- 10kW turbo / 7.6kW continuous output per unit — enough to start motors, well pumps, and HVAC compressors.
- Stack up to 3 units for 30kW turbo and 22.8kW continuous — whole-home performance for typical Sonoma County residences.
- Hybrid by design — solar input, grid charging, and generator-friendly in one cabinet.
- App-controlled — real-time monitoring, storm alerts, and energy dashboards from your phone.
SOLIX E10
Turbo (single)
10 kW
90 min sustained
Continuous
7.6 kW
All-day output
Scalable to
30 kW
3 units paired
Switchover
20 ms
You won't notice
Backup circuits
Up to 12
Prioritized loads
Inputs
Solar · Grid
+ generator support
Real-world runtime varies depending on system size, load selection, battery configuration, and installation design. Eleos sizes every E10 system to your specific home.
Why The E10
Eight reasons homeowners pick the Anker SOLIX E10.
Designed for daily energy savings and outage-day resilience — one battery doing both jobs well.
Whole-home backup power
A single E10 delivers 10kW turbo for 90 minutes and 7.6kW continuous. Scale up to three units for 30kW turbo and 22.8kW continuous — whole-home territory.
Automatic outage protection
The E10 takes over in 20 ms when grid power drops. Most homeowners only notice when their phone pings — the lights, fridge, and Wi-Fi don't blink.
Smart storm readiness
The E10 monitors severe weather forecasts and automatically charges from solar and grid power before an outage hits — so you start the storm at 100%.
Power priority for essentials
Prioritize backup power across up to 12 circuits. You decide what matters — fridge, internet, CPAP, well pump, garage door — and the E10 keeps them running.
Everyday energy savings
Store solar energy by day, run on battery during expensive peak utility hours, and only buy power when rates are cheapest. The E10 pays you back every month.
Smart app control
Monitor battery level, solar production, household energy use, and storm alerts from the Anker app — phone, tablet, or smart display.
Solar & generator friendly
Pair with new or existing solar, charge from the grid, and integrate with a standby generator. The E10 sits at the center of a flexible energy ecosystem.
Quiet, clean alternative to gas generators
No fuel storage, no exhaust, no engine maintenance, no 3 a.m. wake-ups. The E10 sits silently in your garage or outside wall and just works.
How It Works
From quote to power-on in three steps.
Eleos handles the design, permits, and panel integration. You decide what stays on when the lights go out.
Eleos evaluates your home
Free in-home assessment: we walk your panel, measure real loads, review your solar (if any), and look at PSPS history for your address. No pressure, no obligation.
We design the configuration
One, two, or three E10 units. Up to 12 priority circuits mapped to the loads you actually care about. Solar pairing, generator integration, SGIP rebate filing — it's all in the design.
Installed & ready for outages
Permits pulled, code-compliant install, panel integration, commissioning, and a live walk-through of the Anker app. The next time the grid drops, you'll barely notice.
What Can It Power?
A typical Sonoma County home, depending on configuration.
Up to 12 prioritized circuits. You and Eleos pick exactly which ones — here's what most homeowners choose.
Refrigerator
Wi-Fi & Internet
Essential Lighting
Outlets
CPAP / Medical
TV & Devices
HVAC / AC*
Garage Door
*HVAC and electric water heaters are large loads — Eleos sizes the system to your specific equipment. Actual performance depends on system size, load selection, battery configuration, and installation design.
Battery + Solar
Smarter backup — and a smarter electric bill.
Under California's NEM 3.0 solar policy, exporting power to the grid is worth far less than it used to be. Storing your own solar in an E10 and using it after sunset is now the better economic move.
- Bank solar all day, draw it during peak hours and overnight.
- Fully charge from solar and grid before a forecasted PSPS event.
- Retrofit existing solar arrays or pair with a new install.
- Federal 30% tax credit and California SGIP rebate stack on top.
Why Eleos
A licensed local installer — not a national call center.
Eleos is a family-owned, Windsor-based electrical contractor. Every E10 install is permitted, code-compliant, panel-integrated, and personally walked through with you on commissioning day.
More about EleosLicensed electrical expertise
CSLB #1009044. 35+ years of Sonoma County panel work, service-line upgrades, and battery integration.
Real load planning
We measure your actual loads — not catalog estimates — before recommending a 1-, 2-, or 3-unit configuration.
Permit + inspection support
We pull permits, coordinate with PG&E, and walk every install through inspection — you don't lift a finger.
Local crew, local response
Headquartered in Windsor. Service techs across Santa Rosa, Sebastopol, Petaluma, Healdsburg, and the rest of Sonoma County.
Clean installation, no shortcuts
Conduit runs straight. Panel labels read clearly. The kind of finish you'd want behind your own walls.
Homeowner education
Live walkthrough of the Anker app, your priority circuits, and what to expect on outage day — before we leave.
Free Energy Assessment
Find out if the E10 is the right fit for your home.
Answers
Frequently Asked Questions
What is the Anker SOLIX E10?
The Anker SOLIX E10 is a smart hybrid whole-home battery backup system. A single unit delivers up to 10kW turbo output for short-burst loads and 7.6kW continuous output, with 20 ms automatic switchover when the grid drops. Multiple E10 units can be paired for whole-home coverage, and the system supports solar input, grid charging, and integration with most electrical panels.
Can the E10 power my whole home?
Yes — depending on system size, load selection, battery configuration, and installation design. A single E10 backs up essential circuits for most homes. With up to three E10 units paired together, the system scales to 30kW turbo and 22.8kW continuous, which is sized for whole-home backup on most Sonoma County residences. Eleos sizes every system to your home's actual loads.
How many circuits can the E10 back up?
The E10 can prioritize backup power across up to 12 circuits, letting you decide which loads stay on during an outage — refrigerator, internet, lights, CPAP, garage door, security, and more. Eleos builds the load plan with you so the most important circuits are always covered.
Does the E10 work with solar?
Yes. The E10 is hybrid by design — it accepts solar input, charges from the grid, and can also work alongside a generator. New solar pairs natively, and most existing solar arrays can be retrofitted. Eleos evaluates your current setup and recommends the best integration path.
Is a battery backup better than a generator?
For most homeowners, a properly sized battery system is the better daily solution. There's no fuel to store, no fumes, no engine maintenance, and the system kicks in automatically in 20 ms — you never lose power. Generators still make sense for very long multi-day outages or large continuous loads. Many Sonoma County homeowners choose battery first and add a generator as backup-of-last-resort.
How long will the E10 power my home?
Runtime depends on system size, battery configuration, and which loads you choose to back up. A single E10 sustains its 10kW turbo output for up to 90 minutes. With essential-only loads, multi-unit configurations, and solar recharging during the day, properly designed systems run for hours to multiple days. Eleos models expected runtime against your actual home loads before recommending a configuration.
Do I need an electrician to install it?
Yes. Whole-home battery backup is a permitted electrical project in California — it ties into your main service panel, requires load-side or supply-side integration, and must meet California Electrical Code, PG&E interconnection rules, and (when paired with solar) NEM 3.0 requirements. Eleos handles the design, permits, panel integration, and inspection.
Can Eleos Electric help design the right system?
Yes — every Eleos installation starts with a free in-home assessment. We map your circuits, measure your real loads, look at solar potential, review PSPS history for your address, and recommend a one-, two-, or three-unit E10 configuration that fits your goals and budget. We also handle SGIP rebate filing and the federal 30% tax credit paperwork.
Protect Your Home
Ready to protect your home from the next outage?
Schedule an Anker SOLIX E10 consultation with Eleos Electric. Free in-home assessment, transparent quote, and a system sized for your actual loads.